Brenda B11  'The Majestic'

    Identical design paradigm to the Brenda^TM  B2 the Brenda^TM B11 is a single piece bare wire  RCA type connector. It has been designed to be able to be used with those appliances that have their chassis RCA receptors at14mm spacings ( the standard spacing on most audio appliances  is 14mm horizontally and 18mm vertically ).
Unlike the Brenda^TM B2 'The  Ultimate' the Brenda^TM  B11 does not have a ‘ClawLock^TM'.
It is a push fit connector.
 Its dimensions are 61mm long x 21mm high x 12.4mm wide and it weighs just on 58 grammes.
Insertion cylinders for the earth signal ( negative and shield ) is 4.4 mm and for the signal wire ( positive ) is 4.0 mm diameter.
Of an eccentric design the earth cylinder is on top of the signal cylinder. Cylinder depth is a minimum of 14mm.

The Brenda^TM  B11 is a bare wire unshielded RCA type connector.
 

 

Model	Length	Maximum diameter	Maximum Cable Diameter	Spacing ( Between Centres )	Mass
B11 The Majestic	65 mm	21mm high x  13.6 mm wide	10 mm x 17 mm	14 mm horizontally	50 grammes

---

---

Next

Brenda B11 Connector and Cables prices.

Return to Bocchino Audio contents page