Its dimensions are: 115 mm long x 28 mm high x 18mm widest .Its shape similar to a camlobe. As with previous iterations of the B2 only the signal pin is shielded by a ClawLock. Manufactured from High Conductivity Oxygen Free Pure Copper Billet ( 99.94%+Cu ) for all its conductive parts with Teflon for as its main insulator, the BrendaTM B2 has the correct pedigree of materials and design to ensure that it is the absolute ultimate RCA connector ( and not in name alone ) . The design changes have resulted in a yet quieter background and a more tenacious grip on the chassis socket perimeter. Lengthening of the ( Pure Copper ) ClawLock allows for more comprehensive shielding of the Signal Pin delivering a quieter and lower noise floor ( one might as well say there is no perceptible noise floor with the B2; the new design puts paid to any argument about this ). The B2 has a seamless passage for the return cable to the ClawNose. This ensures seamless translation of signal path from cable to ClawNose / chassis socket interface without interruption. This being one of the main features of this Pure Copper Connectors' ability to perform superbly. The Brenda B2 ClawLock is 18.0mm in diameter and 61mm long. it fully encloses the signal pin space and guarantees a firm locking of the B2 to its mount.
-
The BrendaTM
B2 allows for the securing of interconnect wire cores up to 4.10mm
in diameter (5/32" ) directly into the interconnect connector pole piece
for both polarities without the use of solder. There are no soldered
pieces in the BrendaTMB2 connector.
Insertion cylinders are 19.1mm deep ( approx 3/4" ). Wire cores are secured
with 2 x M4 grub screws in both the signal cylinder and return cylinder.
- Because the B2#3 is shaped like a camlobe on an appliance where the centres of the sockets are >18.5mm the lobes can be turned opposed to each other and fit snugly with the reasonable spacings of such an appliance.
- The performance of the B2 will never fade! Hence the name Amaranthine!
- Model
- Length
- Maximum diameter
- Vertical Spacing
- ( Between Centres )
- Mass
- B2#3: "Amaranthine"
- 115 mm
- 18 mm
- 30 mm +
- 145 grammes
Maximum Cable
Outer DiameterClosest Vertical
SpacingHorizontal Spacing
(Between Centres )15.0 mm 19.0mm 19.0mm + 
Click the above image for greater detail.
TheBrendaTM B2 is unconditionally stable for phase and impedance at all audio frequencies.
Next
MORNING GLORY INTERCONNECT CABLE
Evening Star Interconnect Cable
Now utilised by AudioQuest in their William E Low Signature cables
BRENDA B2; Connectors
Return to Bocchino Audio contents page - Because the B2#3 is shaped like a camlobe on an appliance where the centres of the sockets are >18.5mm the lobes can be turned opposed to each other and fit snugly with the reasonable spacings of such an appliance.